Install and Enable EPEL Repo:

yum -y install epel-release

This installs files in /etc/yum.repos.d/ and enables the epel repository by default.

On some servers, leaving EPEL enabled may not be in keeping with best practices to keep as close to the distribution rpm set as possible, so you can set the EPEL repository to be disabled by default.

perl -npi -e 's/enabled=1/enabled=0/' /etc/yum.repos.d/epel.repo

Installing Zabbix Agent

yum -y install zabbix22-agent

or if you have EPEL disabled:

yum --enablerepo=epel -y install zabbix20-agent

Configure Zabbix Agent to use monitor-pdc.rice.edu (10.143.195.18)

sed -i -e 's/Server=127.0.0.1/Server=10.143.195.18/' /etc/zabbix/zabbix_agentd.conf
sed -i -e "s/Hostname=Zabbix\ server/\#Hostname=$(hostname)/" /etc/zabbix/zabbix_agentd.conf

Start Service and Check Status

/sbin/chkconfig zabbix-agent on
/sbin/service zabbix-agent start
/sbin/service zabbix-agent status

Installing the Linux Zabbix Agent, getting the files from monitor.rice.edu

For servers in a closed network, the easiest way to install the Zabbix agent is probably
to download the files from monitor.rice.edu to a local workstation, then copy them over to
/tmp/ZABBIX/ on your server and install from there.
This example assumes we downloaded the files and then copied to EA12.rice.edu:/tmp/ZABBIX/

This installs just the Linux agent program; zabbix_agentd for monitoring. The default
config file will be placed at /etc/opt/zabbix/zabbix_agentd.conf. Everything else is specified
in the config file.

Download zabbix agent and files from monitor.rice.edu

From any section page on monitor
click the tab on the bottom labeled "Get the zabbix agents here"

Select from these options, and download the appropriate files

Linux agent
RH5 32bit statically linked agent
RH5 64bit statically linked agent
Start/Stop script
Win32 agent
Win64 agent
Config file 

Copy all files to client you are installing agent on, into /tmp/ZABBIX/

Setup Zabbix user/groups on the new client

You will need to sudo to root to do the following:

Verify/add Zabbix user/groups

This may already have been done as part of the initial install. Verify and do setup
if necessary.

egrep '^zabbix:' /etc/passwd >/dev/null || cat - >> /etc/passwd << EOF
zabbix:x:906:906:Zabbix User:/home/zabbix:/bin/bash
EOF
egrep '^zabbix:' /etc/group >/dev/null || cat - >> /etc/group << EOF
zabbix:x:906:
EOF
pwconv 

Make home dir for zabbix

Wherever the local admins accounts are, make one for Zabbix. Copy zabbix_agentd
binary into home.

mkdir /home/zabbix 
cp -p /tmp/ZABBIX/zabbix_agentd /home/zabbix
chown -R zabbix /home/zabbix

Setup Zabbix config file

The default init script checks for /etc/opt/zabbix/zabbix_agentd.conf, and if found this file will be used instead of the default config file.

mkdir /etc/opt/zabbix
cp -p /tmp/ZABBIX/zabbix_agentd.conf /etc/opt/zabbix

Install/activate Zabbix init script

cp -pi /tmp/ZABBIX/zabbix_agent_init /etc/init.d/zabbix_agent
chkconfig zabbix_agent on
chkconfig --list zabbix_agent

Create local var directory for log and pid files

mkdir /var/opt/zabbix
chown -R zabbix:zabbix /var/opt/zabbix

Verify IPTABLES for Zabbix connections

Be sure IPTABLES /etc/sysconfig/iptables is updated to accept connections on port 10050, from monitor-pdc.rice.edu (10.129143.92195.52. May be already
done with sitedisk iptables when your system was first installed. Check for a line allowing
connections from 10.129.92.52 (monitor.rice.edu) to port 10050 on client.18). MDI systems should already have this.

A simple example is below:

## Add this IF needed to iptables
## accept Zabbix agent connections on port 10050, from zabbix server
## at 10.129.92.52
-A INPUT -p tcp -m tcp --dport 10050 -s 10.129143.92195.5218/32 -j ACCEPT

Update /etc/services file if necessary:

This may have already been added to /etc/services at initial install. Check for and
add if necessary.

## Zabbix services
zabbix_agent            10050/tcp               # Zabbix Agent
zabbix_trap             10051/tcp               # Zabbix Trap
#

Start zabbix_agent on client

Fire it up:

/etc/init.d/zabbix_agent start

Define monitoring for new client on monitor.rice.edu

 See the wiki:
[ Zabbix Monitoring | https://docs.rice.edu/confluence/x/kwKlAQ^{Image Removed} ]