Page History

...

1. Open the PDF poster file with Adobe Acrobat on station 11any Mac stations.
2. Rotate your poster 90 degree so that the poster is in portrait orientation.
3. Go to File -> Print
4. On the Print window, click on Page Setup
5. Click Yes on the pop-up Page Setup dialog window.
   
   
   
6. On the Page Setup window, Format for: dmc-plotter, Paper Size - Custom Paper Sizes, make sure your Paper Size is set up as shown in the image below:36 inch wide and 48 inch high. 
   
   
   
7. On the Page Setup window, make sure your setup is as follows.
   
   
   
8. Then click OK on the Page Setup window.
9. If your poster does have at least 0.5 inch margins on all the four sides, on the Print window choose Page Scaling: NoneActual Size instead of Fit to Printable Area to have your poster printed at 100% scale.
   Image Removed
10. If your poster doesn't have any margins on all the four sides, choose Fit to Printable Area in general choose Custom Scale 98% to print the whole poster.
    Image Added
11. If the left side for some reason the plotter is cutting off the sides of the poster image is getting cut off during printing and scaling the print below 95% is not working, then in page setup>manage custom sizes, remove 1" and changing "Custom Scale" doesn't resolve the issue, then remove 1 inch from the height dimension and set to fit. See below:
    Image RemovedClick OK to print.in page setup and print using Fit setting:
    Image Added