Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Installation instructions:

1. Install babel from

while installing these commands may be helpful:

  • ../babel/configure --prefix=/Users/shamsimam/softwares --enable-maintainer-mode --enable-python LDFLAGS=-L/Users/shamsimam/softwares/lib JAVAPREFIX=/System/Library/Frameworks/JavaVM.framework/Home JNI_INCLUDES=/System/Library/Frameworks/JavaVM.framework/Home/include
  • make -j4
  • sudo make install
  • make check

make check is optional and may take a long while to complete.

2. After installing babel run the following command:
babel-config --dump | grep SUPPORT

you should get output as follows:
BABEL_SUPPORTED_LANGUAGES="c cxx f77 f90 f03 java python"

ensure that Java and Python are supported.

3. Once babel is installed, you now need to install cnc-babel.
Run "ant clean && ant" on the directory to have cnc-babel installed.
Remember to set CNC_HOME environment variable to the distribution directory, this will be used by some later scripts

4. Running examples, e.g. cholesky

Examples also have associated makefiles. The following commands should run the translator, compiler and execution steps:
make translate
make build
make run

  • No labels